Mechanical Engineering Department
List of Publications

   

1. Dr.P.A.Sastry

PAPERS PRESENTED IN NATIONAL CONFERENCES (2011-2016)

  1. M.Madhavi, A.Swamy, P.A.Sastry, A paper entitled “Dynamic Characteristics of Mono Composite Leaf Spring Using Finite Element Modeling” presented in National Conference on Emerging Trends in Mechanical Engineering organized by Department of Mechanical Engineering, Osmania University, Hyderabad. 29th-30th Dec, 2014.

     

  2. P.A.SastryContinuous path control of a Robot Arm” ICAMM2016 Conference, 16-18 Dec, 2016, Hyderabad.

 

2. Dr.M.Madhavi

PAPERS PRESENTED IN INTERNATIONAL CONFERENCES (2011-2016)

  1. Nizam Khan, A. Syam Prasad, M.Madhavi, A paper entitled “Static & Dynamic Characteristics using Fast Fourier Transforms for Mono Composite Leaf Spring of Variable Thickness with Integrated Metallic Eye Joints” presented in the International Conference Polymer Composites. Organized by NITK, Surathkal, Mangalore, Karnataka 19th -20th, Dec-2014.

     

  2. A.Syam Prasad, M.Madhavi, A paper entitled “Experimental Investigations on Static & Dynamic Parameters of Steel and Composite Propeller Shafts with an Integrated Metallic Joints” presented in the International Conference on Advances in Materials and Manufacturing-2016. Organized by Osmania University, Hyderabad. 8th -10th Dec, 2016.



    PAPERS PRESENTED IN NATIONAL CONFERENCES (2011-2016)

  3. Md.Mustak,M.Madhavi,P.MadarValli A paper entitled “Mathematical Modeling for a Non-Geodesic Fiber Trajectory of Composite Pressure Vessel and its Structural Analysis using Finite Element Technique” presented in the National Conference on Advances in Mechanical Engineering AIM-2012 organized by Vasavi College of Engineering, Hyderabad, A.P 11th -12th October-2012.

     

  4. M.Madhavi,A.Swamy, P.A.Sastry, A paper entitled “Dynamic Characteristics of Mono Composite Leaf Spring Using Finite Element Modeling” presented in National Conference on Emerging Trends in Mechanical Engineering organized by Department of Mechanical Engineering, Osmania University, Hyderabad. 29th-30th Dec, 2014.

     

    PAPERS PUBLISHED IN JOURNALS (2011-2016)

     

  1. M.Madhavi, K.V.J.Rao, K.Narayana Rao “Experimental evaluation of available surface friction on a hoop substrate for a filament wound composite pressure vessel” is published in International Journal of Thermoplastic Composite Materials, ISSN 0892-7057, Vol 24, no 2, March 2011, pp 279-297.

     

  2. M.RaviKumar, P.Srinivas, M.Madhavi, “Experimental Investigations on Thermal Conductivity and Performance Analysis of Filament Wound Fiber Reinforced Heat Exchanger Composite Shell” is published in Manufacturing Technology Today, ISSN 0972-7396, vol-10 no-10, 2011, pp 10-15.

 

 

  1. J.Kandasamy, B.Ravikumar, M.Madhavi, “Experimental Investigations on Natural Frequencies of a Mono Composite and steel leaf Springs Using Fast Fourier Transforms” published in i-manager’s Journal on Material Science, ISSN 2347-2235, vol-01 no 02, 2013, pp 13-19.

     

  2. Md.Mustak, M.Madhavi, “Development of High Strength Helical Coiled Springs Using Carbon Pre-Preg Epoxy Based Composite” published in Indian Journal of Scientific Research, vol-04 no-2 2013, pp109-114.

 

 

  1. M.Madhavi, R.Venkat, “Predicting Structural Behaviour of Filament Wound Composite Pressure Vessel Using Three Dimensional Shell Analysis” published in Journal of The Institution of Engineers(India)-seriesC, ISSN 2250-0545, vol-95 no-02, 2014.

     

  2. M.Pallavi,T.Joel,A.SyamPrasad,M.MadhaviExperimental Investigations on Static and Dynamic Parameters of Steel and Composite Propeller Shafts for a Light Passenger Vehicle” is published in IOSR-Journal of Mechanical and Civil Engineering, e-ISSN:2278-1684, Vol-12 no 4, 2015, pp 01-07.

     

  3. J.KandaSamy, M.Madhavi, N.Harita, “Free Vibration Analysis of Thin Cylindrical Shells subjected to Internal Pressure and Finite Element Analysis” is published in International Journal of Research in Engineering and Technology, ISSN-2319-1163, vol-05 no 13 2016, pp 40-48.

     

    3. Dr.S. Gajanana

    PAPERS PRESENTED IN INTERNATIONAL CONFERENCES (2011-2016)

  1. Srinivas Rao.N, U S Gupta, Anand Rao.A, Gajanana S., Parameshwar K, A paper entitled “Analysis of Machining parameters based on statistically designed Experiment for Turning of Nickel based Super Alloys” presented in the International Conference Advances in Manufacturing Technology - ICAMT 2012 organized by Chennai Institute of Technology in association with ACMEE on 15th - 17th June 2012.

     

  2. B.Ravikumar, Dr.S.Gajanana, Dr.K.Hemachandra Reddy, K.Udayani, A paper entitled “Modeling, Analysis and Optimization of Process Parameters of Metal Spinning” presented in ICMPE 2015: XIII International Conference on Mechanical & Production organized by WASET at Kuala Lumpur, Malaysia, February 12-13, 2015.

 

 

  1. Dr S. Gajanana, B. Suresh Kumar Reddy, T. Shivendra Lohit, K. Anil Kumar Reddy, Ankur Jain “ Optimization of Induction Hardening Process using Response Surface Methodology” presented in the International Conference on International corrosion prevention Symposium for Research Scholars (CORSYM 2015) organized by IITM Chennai, India on 31st July – 1st August 2015.

     

  2. Dr. S. Gajanana, A. Chandrakanth, V. Neeharika, “Effect Of Wire EDM Process Parameters on Surface Finish For Machining High Speed Steel” presented in International Conference on “Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness” November 12-13, 2016, Organised by The Institution of Engineers (India),Jharkhand State Centre ,Under the Aegis of Production Engineering Division Board, IEI In Association with Department Of Production Engineering, Birla Institute of Technology, Mesra, Ranchi, India In Collaboration with Northern Heavy Industries Group Co., Ltd. (“NHI”), China.

 

 

PAPERS PRESENTED IN NATIONAL CONFERENCES (2011-2016)

  1. J.V.Sudheendra, S.Gajanana, J.Suresh Kumar, A paper entitled “Design of A Compact High Reduction Gear Train for Rotary Electro Mechanical Actuator of A Missile”, presented in the National Conference RAME-2012, University College of Engineering, Osmania University, Hyderabad, March-2012.

     

  2. B.Ravikumar, Dr.S.Gajanana, Dr.K.Hemachandra Reddy, K.Udayani, A paper entitled “Development Of Mathematical Model For Forming Force In Metal Spinning Of Al2024-T3” presented in the National Conference on “EMERGING TRENDS IN MECHANICAL ENGINEERING (ETIME 2014) organized by Dept. of Mechanical Engineering, Osmania University, Hyderabad during 29-30 December, 2014.

     

  3. Dr S. Gajanana, M.Malla Reddy, E. Hazya, V. Raviteja, “Multi-level cavity forming analysis using Fluid forming technique” presented in AICTE sponsored National Conference on Innovative Trends in Mechanical   & Automobile Engineering (ITMAE – 2016) organized by Department of Mechanical Engineering, MVSR Engineering College, Hyderabad on 11-12 February, 2016.

     

  4. Dr S. Gajanana, A. Chandrakanth, B. Kshetramohan, B.Ravikumar, “Experimental Investigation of Process Parameters Of Submerged Wire EDM for Machining High Speed Steel” presented in AICTE sponsored National Conference on Innovative Trends in Mechanical   & Automobile Engineering (ITMAE – 2016) organized by Department of Mechanical Engineering, MVSR Engineering College, Hyderabad on 11-12 February, 2016.

     

  5. Dr. S. Gajanana, J.Sita Priya Darsini, Dr.G.Venkata Subbaiah, K.Vikram Aditya, “Computational Analysis and Optimization of Blowing Ratio for Effective Film Cooling of a Gas Turbine Blade” presented in AICTE sponsored National Conference on Innovative Trends in Mechanical   & Automobile Engineering (ITMAE – 2016) organized by Department of Mechanical Engineering, MVSR Engineering College, Hyderabad on 11-12 February, 2016.

     

  6. Dr. S. Gajanana, B. Suresh Kumar Reddy, A. Chandrakanth, “Macro-Economic Variable Base Inventory Control Model for Perishable Items” presented in AICTE sponsored National Conference on Innovative Trends in Mechanical & Automobile Engineering (ITMAE – 2016) organized by Department of Mechanical Engineering, MVSR Engineering College, Hyderabad on 11-12 February, 2016.

     

    PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. K.Devaki Devi, S.Gajanana, N.Vishweshwar “Development of Satellite Component Through Flow Forming Process” is published in International Journal of Multidisp. Research & Advcs. In Engg.(IJMRE), ISSN 0975-7074,Vol.3, No.IV(October 2011),pp.271-284.

     

  2. B Ravikumar, Dr. S Gajanana, Dr. K Hemachandra Reddy, K N Nigam “Development of Co-Ordinate Retrieval System in CAD For Satellite Component by Shear Forming Process” is published in Manufacturing Technology Today ( ISSN 0972-7396 ), Vol 12, No.3, March 2013.

     

  3. Dr. S Gajanana, B Ravikumar,“Development of Model for Deformation in Water Hammer Forming Process” is published in Manufacturing Technology Today ( ISSN 0972-7396 ), Vol 12, No.4, April 2013.

     

  4. Dr. S Gajanana, Dr. L Shiva Rama Krishna, Srinivasa Rao Nandam , BK Mohan “Optimization of Process Parameters of End Milling Process using Factorial Design of Experiments” is published in Manufacturing Technology Today ( ISSN 0972-7396 ), Vol 12, No.6, June 2013.

     

  5. B. Srinivas, Dr. S. Gajanana, Dr. K. Hemachandra Reddy, B. Ravi Kumar “Optimum Replacement Period for Motor Vehicle considering Macroeconomic Parameters” is published in International Journal of Engineering Research (ISSN : 2319-6890) Volume No.2, Issue No. 4, pp : 290-293 01 Aug. 2013.

     

  6. B. Srinivas, Dr.S.Gajanana, Dr.K.Hemanchandra Reddy, “Forecasted Inflation Based Block Replacement Model Using Stochastic Process” is published in International Journal of Applied Mechanics and Materials Vols. 592-594 (2014) pp 2716-2722, Online available since 2014/Jul/15 at www.scientific.net, (2014) Trans Tech Publications, Switzerland.

     

  7. Dr.S.Gajanana, B K Mohan, M Sankeerthan, G V Aswin Reddy, “Optimization of Process Parameters, Micro Structural and Thermal Analysis for Hero Honda Exhaust Valve” is published in International Journal of Research in Mechanical Engineering(IJRME), Volume-2 Issue-4 July-August 2014, ISSN Online: 2347-5188.

     

  8. Dr. S. Gajanana, B. Ravi Kumar, P. Ravi Tej, K. Udayani, “Simulation of Cutting Forces in End Milling and Optimization of Machining Parameters” is published in International Journal of Engineering and Technology Research(IJETR), Volume-2 Issue-6 Nov.-Dec.2014, ISSN Online: 2347-4904.

     

  9. Dr.S.Gajanana, Dr.K.Hemanchandra Reddy, B. Srinivas, “Replacement model with linear trend running cost and forecasted inflation” is published in International Journal of Scientific Engineering and Research(IJSER) Vol 3, Issue 5, May 2015, ISSN Online: 2437-3878.

     

  10. Dr.S.Gajanana, Dr.K.Hemanchandra Reddy, B. Srinivas, “Quadratic Trend Running Cost Replacement Model with Linear Trend Salvage and Predicted Inflation” is published in International Journal of Emerging Trends in Science and Technology (IJETST) Vol.02, Issue 6, Pages 2584-2588, June 2015, ISSN 2348-9480.

     

  11. Dr. S. Gajanana, Kulkarni Rahul, Shreyas Gampa, Tharun Vempati, JV Srinath, “Production & Process Optimization of Micro Alloyed Steel Roller Shaft of an Under Carriage” is published in International Journal of Engineering Research(IJER) Vol.No.4, Issue No.7, pp: 363-367, ISSN: 2319-6890(online), 01 July 2015.

     

  12. Dr S. Gajanana, B. Suresh Kumar Reddy, T. Shivendra Lohit, K. Anil Kumar Reddy, Ankur Jain, “Induction Hardening and Microstructure Analysis of Micro-Alloyed Steel Roller Shaft of an Undercarriage” is published in International Journal of Engineering Research(IJER) Volume No.4, Issue No.7, pp : 358-362, ISSN: 2319-6890(online), 01 July 2015.

     

  13. Dr. S. Gajanana, B. Kshetra Mohan, K. Mogulanna, “Experimental Studies on Ballistic Performance of Glass Laminates” is published in IJSRD - International Journal for Scientific Research & Development, Vol. 3, Issue 05, 2015,Pages 1311-1315,ISSN (online): 2321-0613.

     

  14. P. Ravi Tej, K. Udayani, Dr. S. Gajanana, “Investigation of Mechanical Properties & Characterization of Super Hard Alloys” is published in International Journal of Research in Mechanical Engineering, Volume 4, Issue 4, July-August, 2016, pp. 18-22 ISSN Online: 2347-5188 Print: 2347-8772, DOA: 14072016

     

  15. Dr. S. Gajanana, Dr.D.Chakradhar, N. Sai Alok Reddy, “Optimization of Process Parameters in Hot Machiningof 15-5 PH Stainless Steel Using Taguchi Method” is published in International Journal of Engineering Science Invention Research & Development; Vol. III, Issue III, September 2016(e-ISSN : 2349-6185).

     

  16. Dr. S. Gajanana, B. S. Naveen Benadict, N. Sai Alok Reddy, “Development Of Linear Model For Liquid Hammer Forming Using Design Of Experiments” is published in International Journal of Engineering Applied Sciences and Technology, 2016; Vol. 1, Issue 11, ISSN No. 2455-2143, Pages 54-57.

     

  17. Dr.S.Gajanana, Dr.K.Hemanchandra Reddy, B. Srinivas, “Higher Order HMM Based Group Replacement Model Considering Macroeconomic Variable” is published in International Journal of Engineering Research And Management (IJERM) ISSN: 2349- 2058, Volume-03, Issue-09, September 2016.

     

     

    4. Dr.G. Venkata Subbaiah

     

    PAPERS PRESENTED NATIONAL CONFERENCES (2011-2016)

  1. G. Venkata Subbaiah. “Analysis of phase stability of Diesel-Rice bran biodiesel-Ethanol blends”. National conference on recent innovations in Mechanical Engineering. 21st March 2014 held at CMR Technical Campus, Hyderabad.

     

  2. G. Venkata Subbaiah. Experimental Study of emission characteristics of a diesel engine using rice bran biodiesel and an antioxidant. A two day national conference on recent innovations in Mechanical Engineering. 21-22, November 2014 held at MVSR Engineering College, Hyderabad.

 

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. G. Venkata Subbaiah, Dr. K. Raja Gopal, Syed Altaf Hussain, Dr. K. Tirupathi Reddy. “An experimental investigation on the performance and emissions characteristics of   a diesel engine fuelled with rice bran oil biodiesel and ethanol blends”. International Journal of Green Energy. Vol 8, 2011, pp.197-208.

     

  2. Dr. A. Srinivas, Dr. G. Venkata Subbaiah, P. Venkateswar Rao and M. Penchal Reddy. “Some investigations in the design of low cost variable compression ratio two stroke engine”. International Journal of Mechanical Engineering. Vol2, Issue No.5, May 2012. pp 1-9.

 

  1. G. Venkata Subbaia “Characterization of key properties of diesel-biodiesel-ethanol fuel blends”. International Journal of Engineering Research and Management. Vol.1, Issue 8, November 2014. Pp 223-228.

 

  1. Dr. G. Venkata Subbaiah. “Study of effect of an antioxidant on the performance of a diesel engine using diesel end rice bran biodiesel blends”. International Journal of Engineering Research & Technology. Vol 1.3, Issue-12, December 2014, pp 423-426.

 

  1. Dr. G. Venkata Subbaiah. An investigation on the performance characteristics of a diesel engine using diesel-rice bran biodiesel blends at different injection pressures”. International Journal of Mechanical Engineering & Technology. Vol. 6, Issue-1, January 2015, pp 20-27.

 

  1. Dr. G. Venkata Subbaiah.” Effect of injection pressure on the emission characteristics of a diesel engine using diesel-rice bran biodiesel blends”. International Journal Advanced Research in Engineering and Technology. Vol. 6, Issue 1, January 2015, pp 27-34.

     

  2. J. Sita Priyadarsini, Dr. S. Gajanana, Dr.G.Venkata Subbaiah, K. Vikram Aditya, “Computational analysis and optimization of blowing ratio for effective film cooling of a Gas Turbine Blade”, IJER, vol,.5, pp486-490, Feb, 2016.

5. Dr. C V Kameswara Rao

PAPERS PRESENTED IN NATIONAL CONFERENCES:

  1. Dr. C V Kameswara Rao, A paper entitled “Development of Mathematical model for Pressure Transients in Power Plant and Simulation studies- A case study in system s Modeling and Simulation” presented in the National Conference on Advances in information Technology, NCAIT-2016 organized by department of information technology MVSR Engineering College, Nadergul, Hyderabad. On 22nd &23rd Jan 2016.

     

     

    6. Dr. J. Kandaswamy

    PAPERS PUBLISHED IN INTERNATIONAL JOURNALS (2011-2016)

    1. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Modifications in friction stir welding fixture design for stronger IMC and superior mechanical properties in AA7075 alloys, International Journal on Mechanical & Automobile Engineering (IJMAE) ISSN 0974 -231X, August 2011 – September 2011, Fall Edition 2011, Volume 17, Issue No. 01,     pp. 21 – 26.

     

    2. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Experimental Investigations and Comparative analysis of Friction Stir Welded AA7075 alloy with and without copper as external alloying element in different forms, International Journal of Microstructure and Materials Properties Vol.7, No.4, 2012. Inderscience Publications.

     

    3. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Heterogeneous Friction Stir Welding: Improved Properties in Dissimilar Aluminium Alloy Joints through Insertion of Copper coupled with External Heating, International Journal of Materials and Manufacturing Processes, 27:12, 1429-1436, Taylor and Francis Group, Link to the article: http://dx.Doi.org/10.1080/10426914. 2012.709340.

     

    4.J.KandaSamy, M.Madhavi, N.Haritha, “Free Vibration Analysis of Thin Cylindrical Shells subjected to Internal Pressure and Finite Element Analysis” is published in International Journal of Research in Engineering and Technology, ISSN-2319-1163, vol-05 no 13 2016, pp 40-48.

     

    PAPERS PUBLISHED IN NATIONAL JOURNALS (2011-2016)

    1. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Investigations on the Friction Stir Welded AA6351 Aluminum Joints with Copper Inserts, Journal of Cooperation among University Research and Industrial Enterprises CURIE, Vol. 5, Issue 3 & 4, October 2010 – January 2011, ISSN: 0974 – 1305, pp. 43 – 50.

     

    2. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Mechanical and Metallurgical Characterization of the IMC formed in copper coated aluminum alloys in friction stir welding, i-manager’s Journal on Mechanical Engineering, Vol. 1, No. 2, February - April 2011, pp. 9 – 16

     

    3. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Investigations on the effect of rolling direction on the IMC formed during Friction Stir Welding of AA7075 alloys, The IUP Journal of Mechanical Engineering, Vol.4, No.3, August 2011, pp. 44 – 54.

     

    4. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Experimental Investigations on the Influence of the FSW tool pin profiles towards superior IMC in AA7075 Aluminum alloys, i-manager’s Journal on Mechanical Engineering, Vol. 2, No. 2, February - April 2012, pp. 9 – 16.

     

    5. J. Kandasamy, B. Ravikumar, M. Madhavi, Experimental Investigations on Natural frequencies of a Mono Composite and Steel Leaf springs using Fast Fourier Transforms, i-manager’s Journal on Material Science, Vol. X, No. Y, July – September 2013, pp. Z – G.

     

    6. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Optimization of the Drilling Process Parameters of Glass Fiber Reinforced Plastic Composites, International Journal of Emerging Technology & Research, Sep 2014, Volume 1, Issue 6, pp. 14 -19.

     

    PAPERS PRESENTED IN INTERNATIONAL CONFERENCES:

    1. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Development of a new Drilling Tool for Drilling Hybrid Composites, Proceedings of International Conference on Technological Innovations in Mechanical Engineering, 10 – 11, February 2016, CBIT, Hyderabad.

     

    2. J.Kandasamy, M.Govindaraju, Thin Sheet Magnesium Alloy Composite – Novel Materials for Automotive and Aerospace sectors, Proceedings of International Conference and Expo on Magnesium, 2 – 4, February 2016, Jointly organized by Indian Institute for Metals, Chennai Chapter and VIT Chennai.

     

    3. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Computational Analysis on the stacking sequence on Hybrid Composites and drilling process parameters optimization experimental analysis. Proceedings of International Conference on Material Processing and Characterization. 12 – 13, March 2016, Jointly organized by Maulana Azad National Institute of Technology, GRIET Hyderabad. Accepted for Publication in Materila Procedia, Elsevier Publications

     

    4. S V Narasimha Rao, J. Kandasamy, M Manzoor Hussain, S Rajesham, Experimental Investigations on Microhardness of ECAP Al Alloys at different temperatures, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.

     

    5. J.Kandasamy, Lokeswari, Finite Element Analysis of Super Plastic Forming of Titanium alloys, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.

     

    6. S. V. Narasimha Rao, J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Experimental Investigations on Equal Channel Angular Pressing Process through 1200 Channel Angle, International Conference on Emerging Technologies in Mechanical Sciences, ICEMS 2014 26 – 27, December 2014 at Malla Reddy College of Engineering & Technology, Hyderabad.

     

    7. J.Kandasamy, M. Anjaiah, Computational Analysis on Superplastic forming of Aluminium alloys, International Conference on Emerging Technologies in Mechanical Sciences, ICEMS 2014 26 – 27, December 2014 at Malla Reddy College of Engineering & Technology, Hyderabad.

     

    8. J.Kandasamy, I. Balasundar, M. Anuj Reddy, Some Investigations on the superplastic forming of Titanium Alloys, International Conference on Advances, in Materials, Manufacturing and Applications, AmmA - 2015, at National Institute of Technology Tiruchirapalli. 9 – 11, April 2015, pp. 36 – 42

     

    9. J.Kandasamy, M. Govindaraju, Friction Based Manufacturing Processes, International Conference on Advances, in Materials, Manufacturing and Applications, AmmA - 2015, at National Institute of Technology Tiruchirapalli. 9 – 11, April 2015, pp. 74 – 81

     

    10. S. V. Narasimha Rao, J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Microstructural Analysis of Equal Channel Angular Pressing through different Channel Angles, International Conference on Recent Advances in Material Processing Technology, 07th to 09th January 2013, National Engineering College, Kovilpatti, Hyderabad.

     

    11. M. Anjaiah, Abhijith Dutta, J. Kandasamy, M. Manzoor Hussain, Indigenous Die Design for Superplastic Forming of Pb-Sn Alloys by Gas Pressure, International Conference on Recent Advances in Material Processing Technology, 07th to 09th January 2013, National Engineering College, Kovilpatti, Hyderabad.

     

    12. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Experimental Investigations on the influence of external heating on the mechanical and metallurgical properties in Friction Stir Welding of AA7075 alloys, ICDAAME-2011, 16th & 17th December 2011, SKP Engineering College, Tiruvannamalai, Tamilnadu, India.

     

    13. J. Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Some aspects of copper coating and external heating on the temperature gradient in Friction Stir Welding of aluminium alloys, International Conference on Material Processing and Characterization, 8th – 10th March 2012, Gokaraju Rangaraju Institute of Engineering and Technology, Bachupally, Hyderabad.

     

    14. M Govindaraju, J Kandasamy, M Manzoor Hussain,   K Prasada Rao, Some Aspects of Cross Butt Friction Stir Weldments of Rare Earth Magnesium Alloys – Novel attempts in Friction Stir Welding, Proceedings of the International Conference on Intelligent Manufacturing Systems (ICIMS 2012), SASTRA University, Tanjore. 16th and 17th February 2012.

     

    PAPERS PRESENTED IN NATIONAL CONFERENCES:

    1. S. V. Narasimha Rao J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Experimental Investigations on Equal Channel Angular Pressing Process through 1350 Channel Angle, National Conference on Recent Innovations in Mechanical Engineering, 21 – 22 November 2014, M.V.S.R Engineering College, Hyderabad.

     

    2. J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Investigations on Overlap Distance of Friction Stir Welded Butt Joints - A Feasability Study, Computational and Experimental Investigations on Equal Channel Angular Pressing Process through 1350 Channel Angle, National Conference on Recent Innovations in Mechanical Engineering, 21 – 22 November 2014, M.V.S.R Engineering College, Hyderabad.

     

    3. S. V. Narasimha Rao J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Modeling of ECAP Process, National Conference on Advances in Mechanical Engineering, 11th and 12th October 2012, Vasavi College of Engineering,Hyderabd.

     

    7. Dr. P.V. Durga prasad

    PAPERS PRESENTED IN INTERNATIONAL CONFERENCES:

  1. P.V. Durga prasad, A.V.S.S.K.S. Gupth, R.Haranath, A paper entitled “Comparative study on thermal performance of turbulators in turbulent flow using AL2O3/water nanofluids in a U-tube heat exchanger” presented in the International Conference on Advances in Manufacutring & Thermal Engineering –ICOMATE 2016 organized by Mar Athanasius college of Engineering, Kerala, India on 08th&9th Feb. 2016.

     

    PAPERS PRESENTED IN NATIONAL CONFERENCES:

  2. K.P.V.Krishna Varm, P.S.Kishore, P.V. Durga Prasad, K.Siva Satya Mohan. A paper entitled ”Effect of Shape of Cut in Twisted Tape Turbulators on Enhancement of Heat Transfer Characteristics” presented in the National Conference on Advancements in Mechanical Engineering organized by university college of Engineering Kakinada(A) JNTUK Kakinada A.P India on 22nd &23rd July 2016.

     

    PAPERS PUBLISHED IN JOURNALS:

  3. P.V. Durga prasad, A.V.S.S.K.S. Gupth, “Experimental investigation of enhancement of heat transfer using Al2O3/Water nanofluid in u-tube with twisted tape inserts” is published in International Communication in Heat and Mass transfer 75 (2016) 154-161.

     

  1. Mr. B. Kshetra Mohan

     

PAPERS PRESENTED NATIONAL CONFERENCES:

  1. B. Kshetra Mohan, Experimental investigation of process parameters of submergd wire EDM for machining HSS, National conference on Innovative trends in Mechanical & Automobile engineering. Feb – 11th, 12th, 2016.

     

 

 

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. B. Kshetra Mohan, Experimental Studies on ballistic performance of glass laminates International Journal for Scientific Research & Development (IJSRD). 2015

     

  2. B. Kshetra Mohan Optimization of Process Parameters of End Milling Process Using Factorial Design of Experiments in Manufacturing Technology Today, vol.12, Issue.6, June, 2013.

9. Mr. G. Srinivas Sharma

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. G.S. Sharma, M.V.N. Vamsi and M. Vineel Babu, Coupled Fluid and Heat Flow Analysis around NACA Aerofoil Profiles at Various Mach Numbers, International Journal of Engineering Research and Technology, ISSN 0974-3154 Volume 6, Number 2 (2013), pp. 249-258.

     

  2. G.S. Sharma, M. Vishnu Teja and M. Joshi Kumar, Fluid Flow and Heat Transfer Analysis Across Asymmetric Aerofoil at Various Mach Numbers International Review of Applied Engineering Research. ISSN 2248-9967 Volume 3, Number 2 (2013), pp. 147-154.

 

  1. Subodh Jakkula, G. Srinivas Sharma, Analysis of Cross flow heat Exchanger using Optimization Techniques International Journal of Applied Engineering research &Development (IJAERD) ISSN (P):2250-1584, ISSE (E) VOL-1, ISSUE 6, Dec 2014.

 

  1. G. Srinivas Sharma , CFD Analysis for adaptability of producer gas for power generation in gas turbine International Journal of Mechanical and Production Engineering research and Development ( IJMPERD) April’2015.

     

  2. G. Srinivas Sharma, Design and Analysis of GT combustion chamber for producer gas as working fuel. International Journal of Current Engineering & Technology Feb’2015

 

10. Mr. G. Srinivas Rao

PAPERS PRESENTED IN INTERNATIONAL CONFERENCES:

  1. G. Srinivasa Rao, Application of operating characteristic curve for the development of society, International Conference on Advances in Engineering & Technology, Methodist college of Engg. & Tech, March, 2016

     

  1. Mr. S.V. Narasimha Rao

     

PAPERS PRESENTED IN INTERNATIONAL CONFERENCES:

  1. S. V. Narasimha Rao, J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Microstructural Analysis of Equal Channel Angular Pressing through different Channel Angles, International Conference on Recent Advances in Material Processing Technology, 07th to 09th January 2013, National Engineering College, Kovilpatti, Hyderabad

     

  2. S. V. Narasimha Rao, J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Experimental Investigations on Equal Channel Angular Pressing Process through 1200 Channel Angle, International Conference on Emerging Technologies in Mechanical Sciences, ICEMS 2014 26 – 27, December 2014 at Malla Reddy College of Engineering & Technology, Hyderabad

     

 

  1. S V Narasimha Rao, J. Kandasamy, M Manzoor Hussain, S Rajesham, Experimental Investigations on Microhardness of ECAP Al Alloys at different temperatures, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.

     

PAPERS PRESENTED NATIONAL CONFERENCES:

  1. S. V. Narasimha Rao J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Modeling of ECAP Process, National Conference on Advances in Mechanical Engineering, 11th and 12th October 2012, Vasavi College of Engineering,Hyderabd.

  2. S. V. Narasimha Rao J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Experimental Investigations on Equal Channel Angular Pressing Process through 1350 Channel Angle, National Conference on Recent Innovations in Mechanical Engineering, 21 – 22 November 2014, M.V.S.R Engineering College, Hyderabad

 

  1. Mr. B. Ravi Kumar

     

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. B. Ravi Kumar, “Development of Mathematical Model for Spring force by using double radii tool”, ICAMM2016 Conference, 16-18 Dec, 2016, Hyderabad.

 

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. B. Ravi Kumar, Experimental investigations on natural frequencies of a mono composite and steel leaf spring using Fast Fourier Transform, in i-manager’s journal Material Science, Vol.2, No.7 Issue July-Sep, 2013

  2. B. Ravi Kumar, “Design and Finite Analysis of Canister Testing Chamber”, International journal of Engineering Research & Technology, Vol.1, issue 7, September, 2012.

    .

13. Mr. M. Ravi Kumar

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. Dr.P.Srinivas, P.Ravi Chandra, M.Ravi Kumar & N.Yogi Manash Reddy, Experimental Investigation of LPG as Refrigerant in a Domestic Refrigerator, Journal of Mechanical Engineering Research and Technology, Volume 2, Number 1, (2014) pp 470-476.

PAPERS PUBLISHED IN NATIONAL CONFERENCES:

  1. Srinivas Pendyala, Ravi Kumar M, Ravi Kumar B, Performance Investigation of Two VCR Circuits Connected In Parallel with R134a and HC Blends, International Journal of Engineering Research ISSN:2319-6890)(online),2347-5013(print), Volume No.5 Issue Special 2, pp: 495-498 , 11-12 Feb. 2016.

14. Mr. S. Srinivas

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. Mr. S. Srinivas, Study of process parameters in gas pressure super plastic forming, International journal of Engineering Research & Technology, Vol.5, issue special 2, September, 11-12 Feb, 2016

     

 

 

15. Mrs. J. Sita Priyadarsini

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. J. Sita Priyadarsini, A.V.S. Abhinav, B. Sharath Chandra and R. S. Swathi, Use of Aerodynamic Lift in Increasing the Fuel Efficiency of Heavy Vehicles, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 12, Issue 4, July-Aug, 2015, pp 39-42

PAPERS PRESENTED NATIONAL CONFERENCES

  1. J. Sita Priyadarsini, Dr. S. Gajanana, Dr. G. Venkata Subbaiah, K. Vikram Aditya, Computational analysis and optimization of blowing ratio for effective film cooling of a Gas Turbine Blade, IJER, vo,.5, pp486-490, Feb, 2016

16. Mr. M. Pandarinath

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. M. Pandarinath, N. V. Srinivasulu, Studies on Improved Passenger Seating Comfort in Automobiles, International Journal on Mechanical Engineering and Robotics (IJMER), Volume-4, Issue-4, 2016

     

  1. Mr. B. Suresh Kumar Reddy

 

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. B. Suresh Kumar Reddy, Induction hardening and Microstructure Analysis of Micro Alloyed Roller Shaft on under carriage, International Journal of Engineering Research. 01.07.2015

     

PAPERS PRESENTED IN INTERNATIONAL CONFERENCES:

  1. B. Suresh Kumar Reddy, Optimization of Induction Hardening process using response surface methodology, IIT Madras, 31-July 31st and 1st August.

  

  1. V. Suman Raju

     

PAPERS PUBLISHED IN JOURNALS (2011-2016)

  1. V.suman Raju, R. Ravi kumar, D. Suresh “Computational Analysis of Catalytic Converter Light-off Temperature in Exhaust System of IC Engine” IJER, ISSN-2319-6890(O), Volume No 5, Issue Special 2, pp: 468-472, Feb-2016.

     

  1. R. Ravi kumar

 

PAPERS PUBLISHED IN JOURNALS (2011-2016)

 

  1. R. Ravi kumar, K. Suresh, D. Visnu kumar “CFD Simulations of Down Drought Biomass Gassifier”. IJAERD, ISSN: 2348-4470(O), Volume 3 Issue 1 Jan-2016,

     

  2. R. Ravi kumar, V, Suman Raju, D. Suresh “Computational Analysis of Catalytic Converter Light-off Temperature in Exhaust System of IC Engine” IJER, ISSN-2319-6890(O), Volume No 5, Issue Special 2, pp: 468-472, Feb-2016.

 

 

 

 

  1. Mr.G.Prakasham

 

       PAPERS PUBLISHED IN JOURNALS:

1.G.Prakasham,Dr. L.Siva rama Krishna, Dr.A Seshu Kumar, “A Review on the Effect of Various Process Parameters in Cold Metal Transfer (CMT) GMAW Welding”, International Journal of Engineering Research, ISSN:2319-6890)(online),2347-5013(print)       Volume No.5 Issue Special 2, pp: 432-435.

PAPERS PRESENTED NATIONAL CONFERENCES:

1.G.Prakasham,Dr. L.Siva Rama Krishna, Dr.A. Seshu Kumar, Mathematical Modelling Of Cold Metal Transfer Welding presented in National Conference “National Welding Seminar 2016”, Organised by Indian Institute Of Welding at Kolkata 15-17 Dec,2016.

 

  1. Mr. N. Veman Reddy

PAPERS PRESENTED NATIONAL CONFERENCES:

  1. N. Veman Reddy, A. Syam Prasad, Shrinkage defect elimination in ductile iron casting using virtual solidification simulation, IJER volume 5, pp63-66 conference, Feb, 2016

 

  1. Mr. A. Syam Prasad

PAPERS PRESENTED IN INTERNATIONAL CONFERENCES:

  1. NizamKhan, A. Syam Prasad, Dr. M. Madhavi , Static and dynamic characteristics using fast fourier transforms for mono composite leaf springs of variable thickness with integrated metallic eye joint. International Conference on polymer composites, ICPC -2014,19th Dec, 2014.

     

  2. M. Pallavi,T. Joel, A.Syam Prasad, Dr. M. Madhavi, Experimental investigation on static and dynamic parameters of steel and composite propeller shafts for a light passenger vehicle. Vol.12, issue no. 4 e-ISSN: 2278-1684, 2015.

     

  3. A.Syam Prasad, M.Madhavi, A paper entitled “Experimental Investigations on Static & Dynamic Parameters of Steel and Composite Propeller Shafts with an Integrated Metallic Joints” presented in the International Conference on Advances in Materials and Manufacturing-2016. Organized by Osmania University, Hyderabad. 8th -10th Dec, 2016

     

     

  1. Mr. K. Karthik Rajashekar

  1. N. Haritha, K. Karthik Rajashekar , Dr. M. Madhavi, Computaional apprroaches in design and simulation of type-4 CNG pressure bottle in accordance with ISO11439: 2000(-) for automobile applications, Jan, 2016

     

  1. Mr. M. Bhargava Chandra

PAPERS PRESENTED IN NATIONAL CONFERENCES:

  1. M. Bhargava Chandra, A. Syam Prasad, Enhanced heat transfer of a viscous fluid via heat exchanger using wire loop tube inserts, International Journal of Engineering Research( IJRET) – vol.5, Feb, 2016

     

  1. Mr. T. Murali Mohan Raju

PAPERS PUBLISHED IN INTERNATIONAL JOURNALS (2011-2016)

  1. T. Murali Mohan Raju, Design of high intensity impact – simulation test facility, IOSR – JMCE vol:12, pp39-42, Eissn:2278-1684, PISSN: 2320-334, Vol.13, issue:5, Pp – 119-124, Sep, Oct 2016.

     

     

  1. Mr. V. Nikil Murthy

           PAPERS PUBLISHED IN INTERNATIONAL JOURNALS:

  1. V. Nikil Murthy, Dr. B. Anjaneya Prasad, Dr. M. Ashok Kumar ,Characterization of Carbon Fiber / Epoxy Composites with Different Fiber Parametric Quantity, IJSRST | Volume 1 | Issue 4 | Print ISSN: 2395-6011 | Online ISSN: 2395-602X Themed Section : Engineering and Technology, , Oct’2015.

  2. . Shirish Kumar, V. Nikil Murthy*, C.B.N Murthy, Development and Behavior of Mechanical, Chemical resistance and Morphology Properties of Silicon / Coir Fiber Reinforced Epoxy Hybrid Composites A International Letters of Chemistry, Physics and Astronomy Vol. 59 (2015) pp 124-136,Online:2015-09-14©(2015)SciPressLtd.,Switzerland,doi:10.18052/, 2015.

     

  3. M. Johnson1, Raghava Krishna Sameer, M. Ashok Kumar, V. Nikil Murthy, B.Venkataramana, P. Sagar3, M. Venkateswarlu, Poly (Lactic Acid)/MMT Nanoclay Hybrid Nanocomposites : Mechanical and Thermal Properties, B2, 3 2015 IJSRST | Volume 1 | Issue 4 | Print ISSN: 2395-6011 | Online ISSN: 2395-602X Themed Section: Engineering and Technology, 2015

     

    PAPERS PRESENTED NATIONAL CONFERENCES:

1. V.Nikil Murthy, R. Haranath, B.Suresh Kumar Reddy, Charaterization of Epoxy Hybrid Composition: Effect of Glass/ Sansevieria Cylindrica Fiber on Mechanical & Thermal Properties International Journal of Engineering Research ISSN:2319-6890)(online),2347-5013(print) Volume No.5 Issue: Special 2, pp: 329-334 , 11-12 Feb. 2016

       26. Ms. Aninditha Mistry

         PAPERS PUBLISHED IN JOURNALS

  1. Miss. Aninditha Mistry, Comparison of epoxy composites using E-glass & Carbon Reinforcements The international Research of Applied Engineering Research , May/June ‘ 2015\

     

  1. Ms. N. Haritha

     

       PAPERS PUBLISHED IN JOURNALS

  1. N. Haritha, K. Karthik Rajashekar , Dr. M. Madhavi, Computaional apprroaches in design and simulation of type-4 CNG pressure bottle in accordance with ISO11439: 2000(-) for automobile applications, Jan, 2016.

 

    1. J.KandaSamy, M.Madhavi, N.Haritha, “Free Vibration Analysis of Thin Cylindrical Shells subjected to Internal Pressure and Finite Element Analysis” is published in International Journal of Research in Engineering and Technology, ISSN-2319-1163, vol-05 no 13 2016, pp 40-48.

 

 

 

 

 

 

 

 

Articles View Hits
8979348
   Fri, 20-Oct-2017, 09:00 AMMech PUBLICATIONS.
Powered by Joomla 1.7 Templates
Developed by MVSREC