Mechanical Engineering Department
Head of the Department


head-kandasamy

Name: Dr.J. Kandasamy

Designation: Associate Professor & Head

Coordinator, Alumni Affairs at College Level

Education:

  • Ph.D. (Mechanical Engineering)
    • Thesis Title: Experimental Evaluation and Post Process Characterization of Friction Stir Welded Dissimilar Alloys
    • University: Jawaharlal Nehru Technological University Hyderabad, Kukatpally Hyderabad, 2014.
  • M.Tech (Advanced Manufacturing Systems) from College of Engineering, Jawaharlal Nehru Technological University, Kukatpally,  Hyderabad (I Class with Distinction) 2007.
  • B.E. (Mechanical Engineering) from Madras University, 2002. 

Phone No:9966401295

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

 

Teaching Experience: 14 years 

Papers Published:

     International/National Conferences : 27

     International/National Journals : 15

 

 

Research Projects (Undergoing)

Experimental and Computational Investigations on Superplastic forming of Alumnium coated Magnesium alloys, Minor Research Project, Rs.3,05,000/- UGC, SERO. Ref: F.NO: 4 – 4/2015 – 16 (MRP / UGC – SERO) dated October 2016, Project Proposal Number: 3724

 

Research Areas of Interest

  • Severe Plastic Deformation Processes
  • Metal Joining
  • Design of Experiments/Taguchi Techniques

 

Related Course Work:

Undergraduate Level

  • Engineering Mechanics
  • Kinematics of Machines
  • Dynamics of Machines
  • Finite Element Analysis
  • Tool Design                  
  • Machine Drawing
  • Production Drawing
  • Manufacturing Processes

Postgraduate Level

Failure Analysis and Design

Finite Element Techniques

Experimental Techniques and Data Analysis


Publication(s) / Presentation(s): In Reverse Chronological Order

 

International Journals

 

6. J. Kandasamy, M. Madhavi, N. Haritha, Free Vibration Analysis of Thin Cylindrical Shells subjected to Internal Pressure and Finite Element Analysis, International Journal of Research in Engineering and Technology,  ISSN: 2321 – 7308, Volume 5, No.2, September 2016, pp. 40 – 48.

 

5. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Development of a new Drilling Tool for Drilling Hybrid Composites, International Journal on Mechanical Engineering and Robotics,  ISSN: 2321 – 5747, Volume 4, Issue 5, 2016, pp. 17 – 20.

 

4. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Optimization of the Drilling Process Parameters of glass reinforced plastic composites, International Journal of Emerging Technology and Research,  ISSN: 2347 – 6079, Volume 1,Issue 6, September 2014, pp. 14 – 19.

 

3. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Heterogeneous Friction Stir Welding: Improved Properties in Dissimilar Aluminium Alloy Joints through Insertion of Copper coupled with External Heating, International Journal of Materials and Manufacturing Processes, 27:12, 1429-1436, Taylor and Francis Group, Link to the article: http://dx.Doi.org/10.1080/10426914. 2012.709340, 2012

 

2. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Experimental Investigations and Comparative analysis of Friction Stir Welded AA7075 alloy with and without copper as external alloying element in different forms, International Journal of Microstructure and Materials Properties Vol.7, No.4, 2012. Inderscience Publications.

 

1. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Modifications in friction stir welding fixture design for stronger IMC and superior mechanical properties in AA7075 alloys, International Journal on Mechanical & Automobile Engineering (IJMAE) ISSN 0974 -231X, August 2011 – September 2011, Fall Edition 2011, Volume 17, Issue No. 01,     pp. 21 – 26.

 

National Journals

8. J.  Kandasamy, B. Ravikumar, M. Madhavi, Experimental Investigations on Natural frequencies of a Mono Composite and Steel Leaf springs using Fast Fourier Transforms, i-manager’s Journal on Material Science, Vol. 1, No. 2, July – September 2013, pp.12 – 18.

 

7. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Experimental Investigations on the Influence of the FSW tool pin profiles towards superior IMC in AA7075 Aluminum alloys, i-manager’s Journal on Mechanical Engineering, Vol. 2, No. 2, February - April 2012, pp. 9 – 16.

 

6. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Investigations on the effect of rolling direction on the IMC formed during Friction Stir Welding of AA7075 alloys, The IUP Journal of Mechanical Engineering, Vol.4, No.3, August 2011, pp. 44 – 54.

 

5. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Mechanical and Metallurgical Characterization of the IMC formed in copper coated aluminum alloys in friction stir welding, i-manager’s Journal on Mechanical Engineering, Vol. 1,  No. 2,  February - April 2011, pp. 9 – 16

 

4. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Investigations on the Friction Stir Welded AA6351 Aluminum Joints with Copper Inserts, Journal of Cooperation among University Research and Industrial Enterprises CURIE, Vol. 5, Issue 3 & 4, October 2010 – January 2011, ISSN: 0974 – 1305, pp. 43 – 50.

 

3. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Experimental Investigations on the influence of the position of plates in FSW for dissimilar aluminium alloys, MTT, Manufacturing Technology Today, Volume 9, Issue 7 – 8, July August 2010, ISSN: 0972 – 7396,     pp. 3 – 10

 

2. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Brazing of Silicon Carbide using Ni based alloy and characterization of the joints, MTT, Manufacturing Technology Today, Volume 9, Issue 7 – 8, July August 2010, ISSN: 0972 – 7396,     pp. 3 – 10

 

1. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Dissimilar Friction Stir Welds in Aluminium Alloys: Optimization of the Process Parameters for Tensile strength and Metallurgical Characterization, Technology Spectrum: Journal of Jawaharlal Nehru Technological University Hyderabad, Hyderabad ISSN: 0974 – 6854, Volume 4, No.2, July 2010, pp. 43 – 51.

 

International Conferences

16. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Development of a new Drilling Tool for Drilling Hybrid Composites, Proceedings of International Conference on Technological Innovations in Mechanical Engineering, 10 – 11, February 2016, CBIT, Hyderabad.

 

15. J.Kandasamy, M.Govindaraju, Thin Sheet Magnesium Alloy Composite – Novel Materials for Automotive and Aerospace sectors, Proceedings of International Conference and Expo on Magnesium, 2 – 4, February 2016, Jointly organized by Indian Institute for Metals, Chennai Chapter and VIT Chennai.

 

14. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Computational Analysis on the stacking sequence on Hybrid Composites and drilling process parameters optimization experimental analysis, Proceedings of International Conference on Material Processing and Characterization. 12 – 13, March 2016, Jointly organized by Maulana Azad National Institute of Technology, GRIET Hyderabad. Accepted for Publication in Materila Procedia, Elsevier Publications

 

13. Govindaraju M, Kandasamy J, Friction Based Manufacturing (FBM) Processes, Proceedings of the International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9 – 11, 2015, National Institute of Technology, Tiruchirapalli. pp. 223 – 230.

 

12. J Kandasamy, K.Krishnakanth, Some Investigations on Superplastic forming of Titanium alloys, Proceedings of the International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9 – 11, 2015, National Institute of Technology, Tiruchirapalli. pp. 475 – 482.

 

11. S V Narasimha Rao, J. Kandasamy, M Manzoor Hussain, S Rajesham, Experimental Investigations on Microhardness of ECAP Al Alloys at different temperatures, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.

 

10. J.Kandasamy, Lokeswari, Finite Element Analysis of Super Plastic Forming of Titanium alloys, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.

 

9. S. V. Narasimha Rao, J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Microstructural Analysis of Equal Channel Angular Pressing through different Channel Angles, International Conference on Recent Advances in Material Processing Technology, 07th to 09th January 2013, National Engineering College, Kovilpatti, Hyderabad.

 

M. Anjaiah, Abhijith Dutta, J. Kandasamy, M. Manzoor Hussain, Indigenous Die Design for Superplastic Forming of Pb-Sn Alloys by Gas Pressure, International Conference on Recent Advances in Material Processing Technology, 07th to 09th January 2013, National Engineering College, Kovilpatti, Hyderabad.

 

8. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Some aspects of copper coating and external heating on the temperature gradient in Friction Stir Welding of aluminium alloys, International Conference on Material Processing and Characterization, 8th – 10th March 2012, Gokaraju Rangaraju Institute of Engineering and Technology, Bachupally, Hyderabad.

 

7. M Govindaraju,   J Kandasamy, M Manzoor Hussain,   K Prasada Rao, Some Aspects of Cross Butt Friction Stir Weldments of Rare Earth Magnesium Alloys – Novel attempts in Friction Stir Welding, Proceedings of the International Conference on Intelligent Manufacturing Systems (ICIMS 2012), SASTRA University, Tanjore. 16th and 17th February 2012.

 

6. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Experimental Investigations on the influence of external heating on the mechanical and metallurgical properties in Friction Stir Welding of AA7075 alloys, ICDAAME-2011, 16th & 17th December 2011, SKP Engineering College, Tiruvannamalai, Tamilnadu, India.

 

5. J.  Kandasamy, M. Govindaraju, M. Manzoor Hussain, S. Rajesham, Design, manufacture and analysis of a friction stir welding tool to join aluminium 6 series alloys, International Conference on Intelligent Design and Analysis of Engineering Products, Systems and Computation, 9th  & 10th July 2010, Sri Krishna College of Engineering & Technology Coimbatore 641 008, India.

 

4. J.Kandasamy, M.Manzoor Hussain, R.Aditya, S.Rajesham, Effect of the Weld Direction on Tensile Strength and Hardness in Friction Stir Weldments of AA 6351 Alloys, Proceedings of the International Conference on Emerging Research and Advances in Mechanical Engineering, ERA - 2009, organized by Department of Mechanical Engineering, Velammal Engineering College, Chennai, 19 – 21st March, 2009.

 

3. S.Rajesham, M.Manzoor Hussain, J.Kandasamy, Optimization Of Jig-Boring Process Parameters Using Mahalanobis Taguchi System, Proceedings of the International Conference on Computational Methods in Engineering and Sciences, CMES – 2009, January 8 – 10, 2009, CBIT, Hyderabad.

 

2. J. Kandasamy, M.Manzoor Hussain, S.Rajesham, Development of a Soft Tool for pattern recognition of Rolled threads using MTS, Proceedings of the International Conference on AECOSIM 07 at Arunai Engineering College, March 30th – 31, 2007.

 

1. J.Kandasamy, G.Tirupathi Reddy, K. Srinivasa Rao, Perceptional views of Students on Quality in Technical Education – A Lagrangian Approach, Proceedings of the International Conference on Advances in Mechanical Engineering – 2005, Sree Venkateshwara University, Tirupathi.

 

National Conferences

5. S. V. Narasimha Rao J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Modeling of ECAP Process, National Conference on Advances in Mechanical Engineering, 11th and 12th October 2012, Vasavi College of Engineering,Hyderabd.

 

4. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Automatic Tool Design for Friction Stir Welding Tools to Weld Aluminium Alloys, National conference on Excellence in New Technologies in Mechanical Engineering (ENTIME) 12th & 13th December 2009, Malla Reddy Engineering College for Women, Hyderabad 500 014, India.

 

3. M.Manzoor Hussain, J.Kandasamy, S.Rajesham, Optimization Of Reaming Process Parameters Using Mahalanobis Taguchi System, Proceedings of the National Conference on Robotics and Intelligent Manufacturing Process, RIMP January 2009, organized by Centre for Intelligent Machines and Robotics, Corporate R&D Division, BHEL, Vikasnagar, Hyderabad.

 

2. J. Kandasamy, M.Manzoor Hussain, S.Rajesham, Mahalanobis Taguchi System – Pioneering A Brand New Quality Concept For The Indian Industries, Proceedings of the National Conference on Trends and Innovations in Mechanical Engineering, TIME – 2007, organized by Department of Mechanical and Production Engineering, Deccan College of Engineering and Technology, Hyderabad.

 

 

1. J.Kandasamy, K.Sudhakar, M.Manzoor Hussain, S.Rajesham, Analysis Of Surface Roughness And Hardness On Wire Cut EDM Machined MMC’s ( 6061 Al/Sicp ) Using Taguchi Techniques, Proceedings of the National conference of CAME – 2005, JNTUCEA, Ananthapur.

 

 

Research Projects (Undergoing)

Experimental and Computational Investigations on Superplastic forming of Alumnium coated Magnesium alloys, Minor Research Project, Rs.3,05,000/- UGC, SERO. Ref: F.NO: 4 – 4/2015 – 16 (MRP / UGC – SERO) dated October 2016, Project Proposal Number: 3724

 

Research Areas of Interest

  • Severe Plastic Deformation Processes
  • Metal Joining
  • Design of Experiments/Taguchi Techniques

 

Related Course Work:

Undergraduate Level

  • Engineering Mechanics
  • Kinematics of Machines
  • Dynamics of Machines
  • Finite Element Analysis
  • Tool Design                  
  • Machine Drawing
  • Production Drawing
  • Manufacturing Processes

Postgraduate Level

Failure Analysis and Design

Finite Element Techniques

Experimental Techniques and Data Analysis


Publication(s) / Presentation(s): In Reverse Chronological Order

 

International Journals

 

6. J. Kandasamy, M. Madhavi, N. Haritha, Free Vibration Analysis of Thin Cylindrical Shells subjected to Internal Pressure and Finite Element Analysis, International Journal of Research in Engineering and Technology,  ISSN: 2321 – 7308, Volume 5, No.2, September 2016, pp. 40 – 48.

 

5. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Development of a new Drilling Tool for Drilling Hybrid Composites, International Journal on Mechanical Engineering and Robotics,  ISSN: 2321 – 5747, Volume 4, Issue 5, 2016, pp. 17 – 20.

 

4. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Optimization of the Drilling Process Parameters of glass reinforced plastic composites, International Journal of Emerging Technology and Research,  ISSN: 2347 – 6079, Volume 1,Issue 6, September 2014, pp. 14 – 19.

 

3. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Heterogeneous Friction Stir Welding: Improved Properties in Dissimilar Aluminium Alloy Joints through Insertion of Copper coupled with External Heating, International Journal of Materials and Manufacturing Processes, 27:12, 1429-1436, Taylor and Francis Group, Link to the article: http://dx.Doi.org/10.1080/10426914. 2012.709340, 2012

 

2. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Experimental Investigations and Comparative analysis of Friction Stir Welded AA7075 alloy with and without copper as external alloying element in different forms, International Journal of Microstructure and Materials Properties Vol.7, No.4, 2012. Inderscience Publications.

 

1. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Modifications in friction stir welding fixture design for stronger IMC and superior mechanical properties in AA7075 alloys, International Journal on Mechanical & Automobile Engineering (IJMAE) ISSN 0974 -231X, August 2011 – September 2011, Fall Edition 2011, Volume 17, Issue No. 01,     pp. 21 – 26.

 

National Journals

8. J.  Kandasamy, B. Ravikumar, M. Madhavi, Experimental Investigations on Natural frequencies of a Mono Composite and Steel Leaf springs using Fast Fourier Transforms, i-manager’s Journal on Material Science, Vol. 1, No. 2, July – September 2013, pp.12 – 18.

 

7. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Experimental Investigations on the Influence of the FSW tool pin profiles towards superior IMC in AA7075 Aluminum alloys, i-manager’s Journal on Mechanical Engineering, Vol. 2, No. 2, February - April 2012, pp. 9 – 16.

 

6. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Investigations on the effect of rolling direction on the IMC formed during Friction Stir Welding of AA7075 alloys, The IUP Journal of Mechanical Engineering, Vol.4, No.3, August 2011, pp. 44 – 54.

 

5. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Mechanical and Metallurgical Characterization of the IMC formed in copper coated aluminum alloys in friction stir welding, i-manager’s Journal on Mechanical Engineering, Vol. 1,  No. 2,  February - April 2011, pp. 9 – 16

 

4. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Investigations on the Friction Stir Welded AA6351 Aluminum Joints with Copper Inserts, Journal of Cooperation among University Research and Industrial Enterprises CURIE, Vol. 5, Issue 3 & 4, October 2010 – January 2011, ISSN: 0974 – 1305, pp. 43 – 50.

 

3. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Experimental Investigations on the influence of the position of plates in FSW for dissimilar aluminium alloys, MTT, Manufacturing Technology Today, Volume 9, Issue 7 – 8, July August 2010, ISSN: 0972 – 7396,     pp. 3 – 10

 

2. J.  Kandasamy, M. Manzoor Hussain, S. Rajesham, Brazing of Silicon Carbide using Ni based alloy and characterization of the joints, MTT, Manufacturing Technology Today, Volume 9, Issue 7 – 8, July August 2010, ISSN: 0972 – 7396,     pp. 3 – 10

 

1. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Dissimilar Friction Stir Welds in Aluminium Alloys: Optimization of the Process Parameters for Tensile strength and Metallurgical Characterization, Technology Spectrum: Journal of Jawaharlal Nehru Technological University Hyderabad, Hyderabad ISSN: 0974 – 6854, Volume 4, No.2, July 2010, pp. 43 – 51.

 

International Conferences

16. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Development of a new Drilling Tool for Drilling Hybrid Composites, Proceedings of International Conference on Technological Innovations in Mechanical Engineering, 10 – 11, February 2016, CBIT, Hyderabad.

 

15. J.Kandasamy, M.Govindaraju, Thin Sheet Magnesium Alloy Composite – Novel Materials for Automotive and Aerospace sectors, Proceedings of International Conference and Expo on Magnesium, 2 – 4, February 2016, Jointly organized by Indian Institute for Metals, Chennai Chapter and VIT Chennai.

 

14. Syed Mohibuddin Bukhari, J. Kandasamy, M Manzoor Hussain, Computational Analysis on the stacking sequence on Hybrid Composites and drilling process parameters optimization experimental analysis, Proceedings of International Conference on Material Processing and Characterization. 12 – 13, March 2016, Jointly organized by Maulana Azad National Institute of Technology, GRIET Hyderabad. Accepted for Publication in Materila Procedia, Elsevier Publications

 

13. Govindaraju M, Kandasamy J, Friction Based Manufacturing (FBM) Processes, Proceedings of the International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9 – 11, 2015, National Institute of Technology, Tiruchirapalli. pp. 223 – 230.

 

12. J Kandasamy, K.Krishnakanth, Some Investigations on Superplastic forming of Titanium alloys, Proceedings of the International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9 – 11, 2015, National Institute of Technology, Tiruchirapalli. pp. 475 – 482.

 

11. S V Narasimha Rao, J. Kandasamy, M Manzoor Hussain, S Rajesham, Experimental Investigations on Microhardness of ECAP Al Alloys at different temperatures, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.

 

10. J.Kandasamy, Lokeswari, Finite Element Analysis of Super Plastic Forming of Titanium alloys, Proceedings of International Conference on Recent Trends in Mechanical Engineering, 20 – 21, November 2015, Narasorapeta Engineering College, AP.

 

9. S. V. Narasimha Rao, J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational and Microstructural Analysis of Equal Channel Angular Pressing through different Channel Angles, International Conference on Recent Advances in Material Processing Technology, 07th to 09th January 2013, National Engineering College, Kovilpatti, Hyderabad.

 

M. Anjaiah, Abhijith Dutta, J. Kandasamy, M. Manzoor Hussain, Indigenous Die Design for Superplastic Forming of Pb-Sn Alloys by Gas Pressure, International Conference on Recent Advances in Material Processing Technology, 07th to 09th January 2013, National Engineering College, Kovilpatti, Hyderabad.

 

8. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Some aspects of copper coating and external heating on the temperature gradient in Friction Stir Welding of aluminium alloys, International Conference on Material Processing and Characterization, 8th – 10th March 2012, Gokaraju Rangaraju Institute of Engineering and Technology, Bachupally, Hyderabad.

 

7. M Govindaraju,   J Kandasamy, M Manzoor Hussain,   K Prasada Rao, Some Aspects of Cross Butt Friction Stir Weldments of Rare Earth Magnesium Alloys – Novel attempts in Friction Stir Welding, Proceedings of the International Conference on Intelligent Manufacturing Systems (ICIMS 2012), SASTRA University, Tanjore. 16th and 17th February 2012.

 

6. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Experimental Investigations on the influence of external heating on the mechanical and metallurgical properties in Friction Stir Welding of AA7075 alloys, ICDAAME-2011, 16th & 17th December 2011, SKP Engineering College, Tiruvannamalai, Tamilnadu, India.

 

5. J.  Kandasamy, M. Govindaraju, M. Manzoor Hussain, S. Rajesham, Design, manufacture and analysis of a friction stir welding tool to join aluminium 6 series alloys, International Conference on Intelligent Design and Analysis of Engineering Products, Systems and Computation, 9th  & 10th July 2010, Sri Krishna College of Engineering & Technology Coimbatore 641 008, India.

 

4. J.Kandasamy, M.Manzoor Hussain, R.Aditya, S.Rajesham, Effect of the Weld Direction on Tensile Strength and Hardness in Friction Stir Weldments of AA 6351 Alloys, Proceedings of the International Conference on Emerging Research and Advances in Mechanical Engineering, ERA - 2009, organized by Department of Mechanical Engineering, Velammal Engineering College, Chennai, 19 – 21st March, 2009.

 

3. S.Rajesham, M.Manzoor Hussain, J.Kandasamy, Optimization Of Jig-Boring Process Parameters Using Mahalanobis Taguchi System, Proceedings of the International Conference on Computational Methods in Engineering and Sciences, CMES – 2009, January 8 – 10, 2009, CBIT, Hyderabad.

 

2. J. Kandasamy, M.Manzoor Hussain, S.Rajesham, Development of a Soft Tool for pattern recognition of Rolled threads using MTS, Proceedings of the International Conference on AECOSIM 07 at Arunai Engineering College, March 30th – 31, 2007.

 

1. J.Kandasamy, G.Tirupathi Reddy, K. Srinivasa Rao, Perceptional views of Students on Quality in Technical Education – A Lagrangian Approach, Proceedings of the International Conference on Advances in Mechanical Engineering – 2005, Sree Venkateshwara University, Tirupathi.

 

National Conferences

5. S. V. Narasimha Rao J. Kandasamy, M. Manzoor Hussain, S. Rajesham, Computational Analysis and Modeling of ECAP Process, National Conference on Advances in Mechanical Engineering, 11th and 12th October 2012, Vasavi College of Engineering,Hyderabd.

 

4. J.  Kandasamy, M. Govindaraju M. Manzoor Hussain, S. Rajesham, Automatic Tool Design for Friction Stir Welding Tools to Weld Aluminium Alloys, National conference on Excellence in New Technologies in Mechanical Engineering (ENTIME) 12th & 13th December 2009, Malla Reddy Engineering College for Women, Hyderabad 500 014, India.

 

3. M.Manzoor Hussain, J.Kandasamy, S.Rajesham, Optimization Of Reaming Process Parameters Using Mahalanobis Taguchi System, Proceedings of the National Conference on Robotics and Intelligent Manufacturing Process, RIMP January 2009, organized by Centre for Intelligent Machines and Robotics, Corporate R&D Division, BHEL, Vikasnagar, Hyderabad.

 

2. J. Kandasamy, M.Manzoor Hussain, S.Rajesham, Mahalanobis Taguchi System – Pioneering A Brand New Quality Concept For The Indian Industries, Proceedings of the National Conference on Trends and Innovations in Mechanical Engineering, TIME – 2007, organized by Department of Mechanical and Production Engineering, Deccan College of Engineering and Technology, Hyderabad.

 

1. J.Kandasamy, K.Sudhakar, M.Manzoor Hussain, S.Rajesham, Analysis Of Surface Roughness And Hardness On Wire Cut EDM Machined MMC’s ( 6061 Al/Sicp ) Using Taguchi Techniques, Proceedings of the National conference of CAME – 2005, JNTUCEA, Ananthapur.

Articles View Hits
8979380
   Fri, 20-Oct-2017, 09:02 AMHOD.
Powered by Joomla 1.7 Templates
Developed by MVSREC